Your ad featured and highlighted at the top of your category for 90 days just $5.
"Make this ad premium" at checkout.

Check with seller Does Anyone Know The Ejection Data Of Zinc Die Casting Die Hilo

Published date: September 1, 2020
  • Location: Hilo, Hawaii, United States

In the previous article, we introduced the content of slide block manufacturing in zinc die casting die. I believe you have gained a lot after reading it, and you have a clear concept of zinc die casting die. Today, China Zinc Die Casting Manufacturer will introduce you another difficulty in zinc die casting die-ejection.

Generally, the thickness of ejector plate and retainer plate of die casting machine below 500T is 25mm, and that of ejector plate and retainer plate above 500T is 50mm and 30mm. The ejection distance is less than 30mm or the simple mold may not be provided with a pullback device. The ejector plate should be large enough to connect the four ejector rods of the die casting machine.

Size of ejector pin: as large as possible, and the minimum is 5mm-6mm. If it is not too short, use SKD61 standard ejector pin, such as: 5, 6, 8, 10, 12, 16, 20, 25mm. Ejection distance: the ejected casting is at least 6mm away from the highest point. Unless separately requested. For thin-walled parts, the thimble should not be on the surface as far as possible, but should be distributed on the rib.

Top pin hole of cavity: hole with diameter less than 12 mm, clearance 0,025/0,05 mm, clearance 0,05/0,075 mm, fitting section 25/30mm, and die steel wall thickness between holes at least 4mm, as far as possible 10 mm. Important points: the ejector pin hole and ejector plate must be kept vertical, complicated and accurate. Guide posts and guide sleeves should be set, and the ejector pin hole and ejector pin hole should be kept in a straight line. After heat treatment of the cavity, the ejector pin hole should be processed by wire cutting. The escape space between the ejector pin and the ejector pin hole cannot be contacted together. The ejector plate is fastened with M12 screws, and the interval is not more than 150 mm. When the ejector plate moves forward, it must not damage the mold and cooling water pipe.


The OEM Aluminum Enclosure also our hot product, you can click our website:

Share by email Share on Facebook Share on Twitter Share on Google+ Share on LinkedIn Pin on Pinterest


Useful information

  • Avoid scams by acting locally or paying with PayPal
  • Never pay with Western Union, Moneygram or other anonymous payment services
  • Don't buy or sell outside of your country. Don't accept cashier cheques from outside your country
  • This site is never involved in any transaction, and does not handle payments, shipping, guarantee transactions, provide escrow services, or offer "buyer protection" or "seller certification"

Related listings

  • Male Dominator Can Be Used to Gain a Satisfied Sex Life
    Male Dominator Can Be Used to Gain a Satisfied Sex Life
    Wholesalers - Absecon (New Jersey) - December 3, 2020 Free

    it is said to be best because it contains all the organic and best ingredients in it and all of them are really very much effective in curing all the sexual disorders from your body and by curing all of them, Male Dominator helps you in making your w...

  • Keto Complete:Shed weight quickly
    Keto Complete:Shed weight quickly
    Wholesalers - Adams Center (New York) - December 3, 2020 Check with seller

    I was astounded by the considerable increase in price. I use Weight Loss Diet Pills a lot, in fact I just used Keto Complete Weight Loss Diet. That is generally a better indicator than using this. The popularity of a pretext makes it easy to locate t...

    Wholesalers - Addison (New York) - December 2, 2020 Free

            Peace CBD Oil What these snacks do is commence "bridging you" from meal to plate Herbal Alchemist cbd cannabidiol review . A healthy and balanced close. and that bridge will acquire more time plus time till from dawn to ev...